Help. Away from home

guys. im away from home for a while and i've lost my drain plug out of the Autobox. I called LR, and ordered a replacment, but its probably 2mm too big. its wont even fit in the hole, letalone start on the thread. I called them up and they said its definatly the right bit. I called around a few other landrover places and they all quote the same part number.

Could some body please have a look on rave. Its the drain plug on the autobox, in the sump under the filter. Range Rover p38, 1998, 4.6

The part they gave me is RTC 4647, A0581454, R9AJC, DE70
Seems to be a 1/2" with super course thread.

Thanks.

PS, this is what i've been given RTC4647 DRAIN PLUG & MAGNET ASSY | shop | www.lrseries.com | L. R. Series

OK, how can i tell the difference between a ZF and a ZFG autobox?
Could this be it?
FRC6145 DRAIN PLUG MAGNETIC | shop | www.lrseries.com | L. R. Series

The drain plug is very small on the ZF4HP22 fitted to the P38 with no magnet and an allen key head, the thread is quite fine and maybe less than 10mm diameter. I don't have a part number, sorry.

how can i identify what box i have?

Yours is a ZF4HP24 as you say it is a 4.6. I think the drain plug is the same as the
ZF4HP22 looking at the drawings.

Datatek said:

Yours is a ZF4HP24 as you say it is a 4.6. I think the drain plug is the same as the
ZF4HP22 looking at the drawings.

Click to expand...

data,i think the p38 doozil g/box is the same as the 4.6 g/box.check that out to see if it is.

gemsdad said:

data,i think the p38 doozil g/box is the same as the 4.6 g/box.check that out to see if it is.

Click to expand...

No, only the 4.6 had the ZF4HP24 and then only for a short while then LR reverted to the ZF4HP22 for the 4.6 despite the extra power. At least that's what it says in RAVE

Datatek said:

No, only the 4.6 had the ZF4HP24 and then only for a short while then LR reverted to the ZF4HP22 for the 4.6 despite the extra power. At least that's what it says in RAVE

Click to expand...

ok,i read somehere that the 2.5 doozil and the 4.6 petrol used the same auto box.

datatek. a m10 seems to wind up into the hole, its loose. so thats hear the money. could it be this part? STC4098 AUTO TRANSMISSION SUMP PLUG | shop | www.lrseries.com | L. R. Series

Universally_Challenged said:

datatek. a m10 seems to wind up into the hole, its loose. so thats hear the money. could it be this part? STC4098 AUTO TRANSMISSION SUMP PLUG | shop | www.lrseries.com | L. R. Series

Click to expand...

Yes that is correct.

That looks like the right one.

well the proof is in the pudding..... should be here 11am today

Cheers Guys. All fitted and sorted now.