Heater not getting warm

Got a 1.8 2003 freelander and the heater is not warming up.

don't appear to be any leaks anywhere

any ideas?

thanks

yup - look in the general q's an answers section - then do a search if yu dont find the answer.

Probably a disconnected cable from the heater dial to the heater matrix.

I take it the temperature gauge is at normal temp.

You'll have to remove the centre console and have a look

Northern Irelander said:

Probably a disconnected cable from the heater dial to the heater matrix.

I take it the temperature gauge is at normal temp.

You'll have to remove the centre console and have a look

Click to expand...

is the console easy to remove? if so i'll check it at the weekend

thanks

The Mad Hat Man said:

yup - look in the general q's an answers section - then do a search if yu dont find the answer.

Click to expand...

Had a search before i posted, all i could find was some stuff a the td engine aboult serial and parallel conections of the pipes.. I guess this doesnt apply to the 1.8

thanks

malty123 said:

is the console easy to remove? if so i'll check it at the weekend

thanks

Click to expand...

It is on the earlier models, not sure about the 2003 model.

Start by removing the heater dials, possibly some hidden screws behind them, probably some 'popper' type clips that just need a sharp tug to release them.

Someone put it together, so it has to come apart

selling thermal long john int materland [grey or white] i got white s they looks good int gaylander. . . . .

ming said:

selling thermal long john int materland [grey or white] i got white s they looks good int gaylander. . . . .

Click to expand...

White ull show them **** stains up quicker for you though minge......yer shud have got black

You dont say if its the fan not working or you are getting no heat through vents. If its no heat, see if both coolant pipes are hot going through bulkhead, if neither is hot or only one you need to bleed the heater matrix.