HDC Problem !

C

ccoaton

New Member

Posts

51

Location

Northern Ireland

• Jun 25, 2009

• #1

Ok..
Never really tried my HDC before but it was working fine EG: Press HCD and select First or Reverse and Lights illuminated ok...

But Now when I switch on Ignition I am getting an exclamation ! mark beside the Orange Light of the downward facing dash light

Mine is the one with the HDC on the Gear Lever....................

 

Optimus Prime

Well-Known Member

Posts

5,988

Location

Garden of England

• Jun 25, 2009

• #2

usually down to cables come off the switch or broken inside the gaiter.

 

C

ccoaton

New Member

Posts

51

Location

Northern Ireland

• Jun 26, 2009

• #3

Yep..
Found the 2 wires Black and Blue,.Both broken of from Switch...
Have to try my Soldering skills ...

Thanks for the reply..Hope this cures the Exclamation Mark on the dash..

 

Snifflebag

Active Member

Posts

720

Location

NE Hants

• Jun 26, 2009

• #4

Wouldn't bother with soldering. Depending on how worried about appearances you are, I simply extend the wires using a terminal block to a new push button switch hanging out of the gaiter. Not elegant, but practical!

 

C

ccoaton

New Member

Posts

51

Location

Northern Ireland

• Jun 26, 2009

• #5

Yep...
Thought about that..was gonna wire up a switch and put it in the blank on the center console oposite the rear window switch..