"hat" thingy going between valve's stem and rocker

People Hi,

I would be extremely obliged if someone could provide me with the part
number of the "hat" thingy that sits between the valves' (part number
ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and ERR1202)
pushing the valves.

I do not mean the two pieces cotter valve (part number ETC4069) but the
small hat that tends to be "eaten" by the rocker when the valves' clearance
is not adjusted for some time.

Amazingly this part is NOT shown on Microcat. (or at least my old myopic
eyes do not see it)

Take care and thanks in advance
Pantelis

On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
<[email protected]> wrote:

>People Hi,
>
>I would be extremely obliged if someone could provide me with the part
>number of the "hat" thingy that sits between the valves' (part number
>ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and ERR1202)
>pushing the valves.
>
>I do not mean the two pieces cotter valve (part number ETC4069) but the
>small hat that tends to be "eaten" by the rocker when the valves' clearance
>is not adjusted for some time.
>

It would be helpfull if you told us what engine it was for. However, I
presume you have 200 or 300tdi from the part no's you give. As for the
"hat thingy" do you mean the cup which sits on top of the springs but
below the collets, to retain the valve springs, (ETC4068) or do you
mean the valve stem seal (ETC8663) and/or Valve Stem Cap (LJC100270)

Other than that I can't see any other parts there.

Alex

On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
<[email protected]> wrote:

>People Hi,
>
>I would be extremely obliged if someone could provide me with the part
>number of the "hat" thingy that sits between the valves' (part number
>ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and ERR1202)
>pushing the valves.
>
>I do not mean the two pieces cotter valve (part number ETC4069) but the
>small hat that tends to be "eaten" by the rocker when the valves' clearance
>is not adjusted for some time.

I bought a set off Mr Beamends, so he should definately know the
number for them
They may have been called valve stem caps - but i could be imagining
that.

> I would be extremely obliged if someone could provide me with the part
> number of the "hat" thingy that sits between the valves' (part number
> ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and ERR1202)
> pushing the valves.
>
> I do not mean the two pieces cotter valve (part number ETC4069) but the
> small hat that tends to be "eaten" by the rocker when the valves' clearance
> is not adjusted for some time.

You could try ERR4175 - "Cap-valve stem protection". It's shown in the
parts list of the parts book (300TDI) but not on the exploded view.

Alex Hi,

sorry for forgeting to quote the engine's type.
It is a Discovery 200Tdi.

Unfortunately I can only describe where the part is located. It is mounted
on top of the valve's stem and it is the item where the rockers push the
valve.

Mine were "eaten" away and the mechanic has removed them all in order to be
able to properly adjust the valves but they have to be replaced. I believe
that they are located there so that the valves stems are not damaged/"eaten"
away from the pushing action of the rockers.

Thanks for your kind asssistance.

Take care
Pantelis


"Alex" <[email protected]> wrote in message
news:[email protected]...
> On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
> <[email protected]> wrote:
>
> >People Hi,
> >
> >I would be extremely obliged if someone could provide me with the part
> >number of the "hat" thingy that sits between the valves' (part number
> >ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and
ERR1202)
> >pushing the valves.
> >
> >I do not mean the two pieces cotter valve (part number ETC4069) but the
> >small hat that tends to be "eaten" by the rocker when the valves'
clearance
> >is not adjusted for some time.
> >
>
> It would be helpfull if you told us what engine it was for. However, I
> presume you have 200 or 300tdi from the part no's you give. As for the
> "hat thingy" do you mean the cup which sits on top of the springs but
> below the collets, to retain the valve springs, (ETC4068) or do you
> mean the valve stem seal (ETC8663) and/or Valve Stem Cap (LJC100270)
>
> Other than that I can't see any other parts there.
>
> Alex

Tom and Dougal thanks for your kind replies.

I will order a set of eight ERR4175 - "Cap valve stem protection" and let's
hope these will be the ones.

Take care
Pantelis

"Dougal" <DougalAThiskennel.free-online.co.uk> wrote in message
news[email protected]...
> > I would be extremely obliged if someone could provide me with the part
> > number of the "hat" thingy that sits between the valves' (part number
> > ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and
ERR1202)
> > pushing the valves.
> >
> > I do not mean the two pieces cotter valve (part number ETC4069) but the
> > small hat that tends to be "eaten" by the rocker when the valves'
clearance
> > is not adjusted for some time.
>
> You could try ERR4175 - "Cap-valve stem protection". It's shown in the
> parts list of the parts book (300TDI) but not on the exploded view.
>

In message <[email protected]>
"Pantelis Giamarellos" <[email protected]> wrote:

> Alex Hi,
>
> sorry for forgeting to quote the engine's type.
> It is a Discovery 200Tdi.
>
> Unfortunately I can only describe where the part is located. It is mounted
> on top of the valve's stem and it is the item where the rockers push the
> valve.
>
> Mine were "eaten" away and the mechanic has removed them all in order to be
> able to properly adjust the valves but they have to be replaced. I believe
> that they are located there so that the valves stems are not damaged/"eaten"
> away from the pushing action of the rockers.
>
> Thanks for your kind asssistance.
>
> Take care
> Pantelis
>
>

It's a Valve Stem Cap - all numbers superceed to LJC100270
- used on 200/300Tdi and optionaly on 2.5P/2.5D and 2.5TD

Cheers
Richard


> "Alex" <[email protected]> wrote in message
> news:[email protected]...
> > On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
> > <[email protected]> wrote:
> >
> > >People Hi,
> > >
> > >I would be extremely obliged if someone could provide me with the part
> > >number of the "hat" thingy that sits between the valves' (part number
> > >ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and
> ERR1202)
> > >pushing the valves.
> > >
> > >I do not mean the two pieces cotter valve (part number ETC4069) but the
> > >small hat that tends to be "eaten" by the rocker when the valves'
> clearance
> > >is not adjusted for some time.
> > >
> >
> > It would be helpfull if you told us what engine it was for. However, I
> > presume you have 200 or 300tdi from the part no's you give. As for the
> > "hat thingy" do you mean the cup which sits on top of the springs but
> > below the collets, to retain the valve springs, (ETC4068) or do you
> > mean the valve stem seal (ETC8663) and/or Valve Stem Cap (LJC100270)
> >
> > Other than that I can't see any other parts there.
> >
> > Alex
>
>

--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Helping keep Land Rovers on and off the road to annoy the Lib Dems

On or around Wed, 19 Jan 2005 23:09:36 GMT, Alex <[email protected]>
enlightened us thusly:

>On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
><[email protected]> wrote:
>
>>People Hi,
>>
>>I would be extremely obliged if someone could provide me with the part
>>number of the "hat" thingy that sits between the valves' (part number
>>ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and ERR1202)
>>pushing the valves.
>>
>>I do not mean the two pieces cotter valve (part number ETC4069) but the
>>small hat that tends to be "eaten" by the rocker when the valves' clearance
>>is not adjusted for some time.
>>
>
>It would be helpfull if you told us what engine it was for. However, I
>presume you have 200 or 300tdi from the part no's you give. As for the
>"hat thingy" do you mean the cup which sits on top of the springs but
>below the collets, to retain the valve springs, (ETC4068) or do you
>mean the valve stem seal (ETC8663) and/or Valve Stem Cap (LJC100270)
>
>Other than that I can't see any other parts there.

Valve stem cap. Some were AWOL on our 300 TDi, 'til I replaced 'em.

--
Austin Shackles. www.ddol-las.fsnet.co.uk my opinions are just that
"Festina Lente" (Hasten slowly) Suetonius (c.70-c.140) Augustus, 25

Richard and Austin thanks.

(Richard you are unlucky. I ordered them just a few minutes before I got
your posting)

Take care
Pantelis

"beamendsltd" <[email protected]> wrote in message
news:e88c20304d%[email protected]...
> In message <[email protected]>
> "Pantelis Giamarellos" <[email protected]> wrote:
>
> > Alex Hi,
> >
> > sorry for forgeting to quote the engine's type.
> > It is a Discovery 200Tdi.
> >
> > Unfortunately I can only describe where the part is located. It is
mounted
> > on top of the valve's stem and it is the item where the rockers push the
> > valve.
> >
> > Mine were "eaten" away and the mechanic has removed them all in order to
be
> > able to properly adjust the valves but they have to be replaced. I
believe
> > that they are located there so that the valves stems are not
damaged/"eaten"
> > away from the pushing action of the rockers.
> >
> > Thanks for your kind asssistance.
> >
> > Take care
> > Pantelis
> >
> >
>
> It's a Valve Stem Cap - all numbers superceed to LJC100270
> - used on 200/300Tdi and optionaly on 2.5P/2.5D and 2.5TD
>
> Cheers
> Richard
>
>
> > "Alex" <[email protected]> wrote in message
> > news:[email protected]...
> > > On Thu, 20 Jan 2005 00:30:50 +0200, "Pantelis Giamarellos"
> > > <[email protected]> wrote:
> > >
> > > >People Hi,
> > > >
> > > >I would be extremely obliged if someone could provide me with the
part
> > > >number of the "hat" thingy that sits between the valves' (part number
> > > >ERR1156 and ERR1157) stem and the rocker (part number ERR1201 and
> > ERR1202)
> > > >pushing the valves.
> > > >
> > > >I do not mean the two pieces cotter valve (part number ETC4069) but
the
> > > >small hat that tends to be "eaten" by the rocker when the valves'
> > clearance
> > > >is not adjusted for some time.
> > > >
> > >
> > > It would be helpfull if you told us what engine it was for. However, I
> > > presume you have 200 or 300tdi from the part no's you give. As for the
> > > "hat thingy" do you mean the cup which sits on top of the springs but
> > > below the collets, to retain the valve springs, (ETC4068) or do you
> > > mean the valve stem seal (ETC8663) and/or Valve Stem Cap (LJC100270)
> > >
> > > Other than that I can't see any other parts there.
> > >
> > > Alex
> >
> >
>
> --
> www.beamends-lrspares.co.uk [email protected]
> Running a business in a Microsoft free environment - it can be done
> Powered by Risc-OS - you won't get a virus from us!!
> Helping keep Land Rovers on and off the road to annoy the Lib Dems