i accidentally reversed into a very large skip the other day (it was dark and reverse light stopped working for some reason)and its made quite a bit of mess at the back offside corner, was wondering where the best place would be to get a rear quarter pane,l outer wing and a corner capping ?
Had a little bump
- Thread starter nathan22
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
G-man
BBQ king
- Posts
- 12,065
- Location
- essex.... in the middle somewhere
good we likes pics,
Griffdowg
New Member
- Posts
- 7,194
- Location
- Somewhere in Bristol
lovely, congratulations 
i think you should be able to get it reasonable with a hammer and a bit of 2x4 depends how fussy you are
G
i think you should be able to get it reasonable with a hammer and a bit of 2x4
depends how fussy you areG
ratty
I'm not special I'm limited edition
- Posts
- 34,277
shame. I got a brand new complete genuine 110 nearside quarter hanging around doing nothing.
Remove the corner capping, clamp the side panel and then use a winch or a landy with a tow rope to tug the crease out. You may have to tap the panel while it's under tension to help get it straight. Thats all I did with mine and it was as bad as yours.
MrJC
Well-Known Member
- Posts
- 1,241
In accordance with Section 139 of the Highways Act 1980 and Section 65 of the Road Traffic Regulations Act 1984, it is a legal requirement that skips placed on a public highway must be lit at night.
If it wasn't, speak to your insurance company.
Having recently put new body cappings on mine (complete novice) they come in one piece. If that body capping aint straight you will always take in water. It may straighten?
Price up the bits but it will be a back door off, roof off or propped enough to get the side off and drill the body capping rivets off.
I think you could do it in a weekend.... its worth making a nice job of it. IanNotts does parts or Paddocks, lrseries.
If it wasn't, speak to your insurance company.
Having recently put new body cappings on mine (complete novice) they come in one piece. If that body capping aint straight you will always take in water. It may straighten?
Price up the bits but it will be a back door off, roof off or propped enough to get the side off and drill the body capping rivets off.
I think you could do it in a weekend.... its worth making a nice job of it. IanNotts does parts or Paddocks, lrseries.
Similar threads
Disco 3 (LR3)
Rear Air Suspension Raising & Lowering, Valve % Mismatch
