Groaning noise on clutch

kee

Member

Posts

98

Location

Rochdale

• Feb 20, 2020

• #1

I have a noise coming from the clutch, after reading about it I think it is the spigot bush or thrust bearing. Just wondering if anyone had an idea of how much it usually cost to have it sorted?

 

sierrafery

Well-Known Member

Posts

17,911

Location

Arad/Romania

• Feb 20, 2020

• #2

The problem is with the labour cos it's a gearbox off job eiher way

 

NPG

Well-Known Member

Posts

455

Location

Ireland

• Feb 20, 2020

• #3

This is one job that's very awkward for DIY, especially if you're on your own unless you have a car lift and a cradle that can take the combined weight of the gearbox + t-box. I did mine at the dealer in N. Ireland 4 years ago and it cost me £800 for labour, a hired car and a DMF + new bolts, clutch, bearing, spigot bush, fork, slave cylinder + a car wash

 

T

tilly2

Well-Known Member

Posts

1,193

Location

Stafford

• Feb 20, 2020

• #4

Parts are cheap, but as said, its the labour thats going to sting you in the ass...

 

sierrafery

Well-Known Member

Posts

17,911

Location

Arad/Romania

• Feb 21, 2020

• #5

IMO it can become expensive cos the wise thing would be to replace the whole clutch pack too once the gearbox is removed anyway

 

N

Nig43

Active Member

Posts

158

Location

TAMWORTH, STAFFS

• Feb 21, 2020

• #6

+1

 

T

tilly2

Well-Known Member

Posts

1,193

Location

Stafford

• Feb 21, 2020

• #7

+2

 

B

brianconwy

Well-Known Member

Posts

1,112

Location

conwy, north wales

• Feb 22, 2020

• #8

You could possibly save by not renewing the DMF if it isn't giving any trouble. Did ours on the drive. Engine hoist bought used from ebay and sold for what we paid for it. They sell quick. If you like tackling challenges and have the time to have the car off road then it can be done. We didn't find it easy but if there was a next time it would be easier.