wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
surely they should be done for unsafe load?
green laning on salisbury plains
- Thread starter andyt12
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Too much like real work for Plod to take it on.. Plus no profit or reduction in crime figures.. So it definately int getting dealt with.
blue beasty
Leaks an prone to bits dropping off
- Posts
- 62,947
- Location
- Gloucestercotshirewolds
I gotta 200 rad if thats any help......
Thanks but I'm after a 300 rad bidding on one on eBay at the min that or ask the local breakers as new their frigging expensive.
About £200 for allmakes.
£90 for britpart ( I would soon as cut my own nuts off than use them though)
And just short of £400 fron the main steeler
disco147
Well-Known Member
- Posts
- 1,147
- Location
- Chichester, West Sussex
400 quid.... ouch! Wont be gettin it from them then! Sorry bout yer bad news! Wlm... let me know if your out, i got plenty to do on me landy if there isnt a trip so no dramas!
OxonLandy
Active Member
- Posts
- 574
- Location
- nr Abingdon, Oxon
you could always cut your nuts off and sell em to make the cash for a new rad
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
My new aluminium core rad was only £99 new inc delivery
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
sundays out for me im afraid..will get summit together soon
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Have ya sorted ya stuck gearbox, out yet??
disco147
Well-Known Member
- Posts
- 1,147
- Location
- Chichester, West Sussex
Whats the problem wlm? Any ideas yet? I'll be off to boxgrove p&p then if amyone wants to meet there
andyt12
Active Member
- Posts
- 253
- Location
- Ludgershall
wheres Boxgrove? how much? cheers
gillett33
Active Member
- Posts
- 192
- Location
- Tidworth, wiltshire
I would of been up for a drive of the plains on Sunday but I'm now busy Sunday sorry fellas I'll keep an eye open for the next one
disco147
Well-Known Member
- Posts
- 1,147
- Location
- Chichester, West Sussex
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
not yet..
its been suggested as i left it in reverse and its parked on a slight slope it could be resting on the gear?
which means i need some strong men to try and push it back a bit and see if it releases,or do i risk pullin it forward? dont wanna damage anything further
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
not yet..
its been suggested as i left it in reverse and its parked on a slight slope it could be resting on the gear?
which means i need some strong men to try and push it back a bit and see if it releases,or do i risk pullin it forward? dont wanna damage anything further
stick the boy in it with clutch pedal down. and yu & missus rocking it. If it doesn't move then it's something a bit more serious.
not yet..
its been suggested as i left it in reverse and its parked on a slight slope it could be resting on the gear?
which means i need some strong men to try and push it back a bit and see if it releases,or do i risk pullin it forward? dont wanna damage anything further
put the van on the back of it and give it a wee tug backwards to release pressure.
wiltshire landyman
I’m back
- Posts
- 15,062
- Location
- salisbury plain wiltshire
the 8ft wall might hinder that
.will give it a go tomoz got an afternoon wedding and eve rec to do so aint got time today..will let ya know what happens
andyt12
Active Member
- Posts
- 253
- Location
- Ludgershall
I am going out tomorrow for a drive over plains with my daughter, nothing to extreme as on my own so will be going across from devizes area to upavon and maybe onto sidbury hill, using the byways and see whats about.
