brianconwy
Well-Known Member
- Posts
- 1,112
- Location
- conwy, north wales
I have taken the front regulator and motor out. I have a new regulator, but now the motor doesn't work. If I conect it up on a bench to a 12v supply it works. When pressing the window switch there is a slight voltage of just 0.15v. I connected up the lynx interface and it recognises that the switches are pressed. When I try to force the actuator with the Lynx nothing happens wth the motor.
All the other windows work OK.
Is there a relay somewhere that might be the trouble?
All the other windows work OK.
Is there a relay somewhere that might be the trouble?