Spartan1st
New Member
- Posts
- 17
- Location
- Fareham
Since it's a nice day, I thought i'd change the bushes on the front radius arm. Over the last 6 months, I have done every other SOB bush on the truck and left the front radius arms 'til last as it was already fitted with poly bushes - therefore lowest priority.
Got all the nuts off. I didn't have to counter hold the bolts when undoing the nuts, at the time I thought it was a bonus, how wrong I was! I can't move the bolts at all! I got a metre long bar and am hanging of it just to get the bolt to turn, let alone belt it out with the minimal space I have with a hammer.
It's jacked up, stands on the chassis. I have tried it on the ground too, same problem. Something is biting the bolts hard. Worryingly, when I turn the bolt, it squeaks. Wonder if the muppet before me didn't put the metal sleeve through!?
Any suggestions? The only alternative I can think of is to take the swivel assy off so I can get a good swing with a hammer.
Got all the nuts off. I didn't have to counter hold the bolts when undoing the nuts, at the time I thought it was a bonus, how wrong I was! I can't move the bolts at all! I got a metre long bar and am hanging of it just to get the bolt to turn, let alone belt it out with the minimal space I have with a hammer.
It's jacked up, stands on the chassis. I have tried it on the ground too, same problem. Something is biting the bolts hard. Worryingly, when I turn the bolt, it squeaks. Wonder if the muppet before me didn't put the metal sleeve through!?
Any suggestions? The only alternative I can think of is to take the swivel assy off so I can get a good swing with a hammer.