P38A Front door glass seperated

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

EntropyUK

Well-Known Member
Posts
467
Location
Hemel Hempsted
Last night I lowered my drivers side window and the glass has come loose. I have not done anything yet so assume that the glass has come away from the runner. I can hear it operating when trying to raise or lower.

I don't recall seeing this issue in any thread before. So any hints and tips before I strip the door?
 
It's straight forward to strip. Door handle screws,
Inner door opening lever cover screw,
Plastic part back of door mirror(interior)
There is a screw behind there!! ,
Then pop the clips carefully all around the door card.
Be careful near the edge of the door card close to the armrest. It'll break there!
 
Plastic runner clip or even the rivest have popped out of the inner door frame🤔
+1 on rivets. Same happened on mine couple of years back. Door card off 2 of rivets missing so 3rd loose , short screw with hex head into each hole, job done. Don't even bother riveting
1697290246355.png
 
Back
Top