Front Bumper removal (how to loosen the rusty screws)

Cmdr_Keen · Feb 1, 2010

Hi,

I've been trying to remove the front bumper to replace one the headlight units. But I'm stuck with a couple of rusty screws. They're the ones that connect the front bumper with the wheelarch protection. So it's all soft plastic, so applying force to them is really hard. I've thought about using a screw extractor, but there must be another way to remove body parts of the Freelander without renewing the screws all the time. Can anybody help me get to these screws? Tnx!

freebiker · Feb 1, 2010

Will a pair of moles or pliers not grip them? Had the same problem with my mud flaps.

c13tay · Feb 1, 2010

you dont need to remove front bumper to remove headlights !!!

Cmdr_Keen · Feb 1, 2010

I've tried pliers, but they're completely round, so it's very hard to grap them.

@c13tay: Trust me, I've tried. But I can't get to the bottom screw of the unit. According to my manual I need to remove the front bumper first. Unless you've got some kind of trick...

c13tay · Feb 1, 2010

I used a large screwdriver with a rag wrapped round it and "gently" deflected the top of the bumper down and out of the way.

Cmdr_Keen · Feb 3, 2010

I've had another go at it, but I guess my hands are just to big to get there. So back to the front bumper removal. I've got some screw extractors, so if everything else fails, that'll solve it...

c13tay · Feb 3, 2010

Keep trying

That little nut at the bottom (10mm I think) only need to be slackend a fraction. It slots into a cut out so doesnt need to be removed, just loosened a tad !!

Chris

Front Bumper removal (how to loosen the rusty screws)

Cmdr_Keen

New Member

freebiker

Well-Known Member

c13tay

New Member

Cmdr_Keen

New Member

c13tay

New Member

Cmdr_Keen

New Member

c13tay

New Member

Similar threads