Freelander headlight upgrade facelift

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Any advice more than welcome as I haven't started yet. Hope to tackle same over the weekend. Is there any problems with mounting the new lights matching with the original front section when you have the cut away done?
Many Thanks
 
Hoo ray!!! the bumpers F+B and lights came today..... i know what il be doing this weekend... ordered a litre of van'e'shun mauve paint today for my mate to colour code it before putting it on.
Pictures will follow as soon as i have finnished it. cant wait.

Mick
 
have got all the info i need from a thread from stuarts the man fl upgrade how its done 41123 posted 30/may/07.great info
 
painted bumpers over the weekend.... look really hot, i don't think they did the facelift in purple..
Having the grill bit silver.
shame i broke the bolts getting the rubber bull bar off.. f ing nightmere to get off, still.....
all being well all on a fitted by end of the week weather allowing.
 
Have you got a wiring diagram for the headlights ? this is the only part that is putting me off doing the conversion to my freelander
 
Have you got a wiring diagram for the headlights ? this is the only part that is putting me off doing the conversion to my freelander

working on that at the mo....got some blank molex plugs from maplin..
making a custom loom.

i will post full details as soon as its finished.

i didnt want to hack wires eather so this will plug into the exhisting wiring then into the new plugs/sockets.

Mick:D
 
Mick if you need the correct plugs for your lights mate mail me i can supply these free of charge Matty :D
 
Hoo ray!!! the bumpers F+B and lights came today..... i know what il be doing this weekend... ordered a litre of van'e'shun mauve paint today for my mate to colour code it before putting it on.
Pictures will follow as soon as i have finnished it. cant wait.

Mick

Hi Mick

Any pictures yet? :eek:
Would love to see them :D

Chris
 
Hi , all is not good at the mo.... had to cover extra shifts at work.... just done 12 on the run 10pm till 8am sleepin all day , im fooked... just need a good dry day to get it sorted.. i am gettin stick of her in doors as well as its in the spare bedroom... errrr its my house!!! i can put what i want in any room i like.... if i choose to have chequerplate wallpaper i will!!!! ( ihavent by the way)
 
Does anyone have a step-by-step picture guide? I don't want to go at it like a bull in a china shop and end up stumped half way through.
I have a 2001 V6 ES 3 Dr model.Would that be more difficult as the bumper is different to the 1.8 .Does this make a difference to the upgrade or will any of the upgrade bumpers fit? Also, are clips, screws etc in the same place or what? I'm new to this forum so would appreciate any help at all.
Thanks......
Ian
 
there is a thread on here somewhere with full instructions.

the kit shown in wgh's post above has a big scuff / rub down on the rhs of the front bumper, be careful !
 
Glad yopu liked it Im sorry to say Freelander has gone now
due to be not very good offroad

I got stuck and it took 4 hours with a Massey Tractor to free me Think the mud was a bit DEEP as the tractor go Stuck 2


For anybody doing conversion Its simple and can be fitted within a morning

Whats Needed

1 Front Bumper 2004 shape

2 Headlights 2004 shape

3 Wiring plugs Most later shape Bmw Plugs fit i used Bmw mini Plugs

4 Rear bumper

5 Rear upper lights Need holes drilling in body to fit

6 Rear lower lights Just needs wire making longer

7 Angle grinder needed for front Light fitting

8 Hammer needed To remove lip for rear Bumper fitment

9 Thanks All

10 Matty Muply
 
Thought Id bring this thread back up to the top because Im in the process of getting all the bits to facelife the Mrs's FL.
Someone mentioned that full instructions to do the job are on a thread on here but Iv been trawling & cant seem to find it.. Does anyone know where it is?
Thanks Ian

Oh great work Muply, you done a good job there mate.
 
Back
Top