Freelancer in limp mode

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Brycemac

New Member
Posts
2
Location
Burscough
Hi everyone , my td4's power management with the exclamation started coming on then car started losing power and trouble starting,I had a full service done which seemed to do the trick,but after I parked it up went to work it started ok but light came back on and couldn't accelerate properly ie back into limp mode,I was wondering do I need a new fuel pump or fuel sensor any help or ideas would be appreciated thanks
 
If he'd bought a proper one he could at least have fixed it with a hammer.

Anyway its the hair straigheners malfunctioning. When the cable gets twisted it confuses the flux capacitor into thinking its straight thus the vehicle goes into limp mode to overcompensate for the faux-heterosexuality
 
I presume yours is a 2A> on the chassis rail on the LH side of the car there are the fuel pipes, unplug the fuel pressure sensor and see if performance resumes if so it would seem you require a low pressure pump p/n WFX000181 :)
 
Back
Top