fookin rad advice please

wiltshire landyman · Jan 27, 2009

right fitted me tdi enjin and put a new rad in but when i got it out it scraped a cap inside the box and damaged some fins,no probs i thought so we installed it and have had it runnin lovely but guy whos doin the winch has noticed that one of the water runners dont know what they are called has a small crack in it where i damaged it and when its runnin it leaks fookin ell,my mate who solderd up me heater matrix says he cant do the same with the rad cos its aluminium so is there anything i can use that will fix this hole..help please

Trewey · Jan 27, 2009

you could try draining it, getting it dry, then applying some chemical metal.

wiltshire landyman · Jan 27, 2009

is almost the very top runner so the water level is below it at the moment is chemical metal available from halfrauds or somewhere like that

Griffdowg · Jan 27, 2009

pinch and fold with some pliers? i did this with success on my last rad... but the whole lot was ****ed so i replaced it!

G

G-man · Jan 27, 2009

chemical metal works, i used it on my motorbike rad

mysteryman · Jan 27, 2009

I thought u could solder aluminium? Sure we used to use aluminium wire when I worked for BT n we used to solder that (sometimes)

sypher · Jan 27, 2009

You could pinch it like griff said , then bung some rad weld in it for the time being

boydy1989 · Jan 27, 2009

rad weld works really well atually

gblow · Jan 28, 2009

try K-SEAL RADIATOR HEAD GASKET STOP LEAK this is very very good cost about £10 for a 1/6 of a litre

oil dripper · Jan 28, 2009

blowjob said:
try K-SEAL RADIATOR HEAD GASKET STOP LEAK this is very very good cost about £10 for a 1/6 of a litre

cured me head gasket that stuff (long enuff ta sell it anyroads)

sypher · Jan 29, 2009

oil dripper said:
cured me head gasket that stuff (long enuff ta sell it anyroads)

Remind me Never to buy anything of you then mate :doh: .

oil dripper · Jan 29, 2009

sypher said:
Remind me Never to buy anything of you then mate :doh: .

heheee i was about ta sell it an i had a pipe split on me,fixed that and found it was pressurisin the system, i cnut be arsed tekin heads off wen it was goin up for sale so scratched me head abit an ended up gerin k-seal i lerrit go cheap thou

woods767 · Jan 29, 2009

I once bought a calibra that was sold cheap because it had a leeky heater matrix and rad, which Vauxhaull dealers had quoted £440 to repair. I fixed it perminently with a bottle of rad weld.

boydy1989 · Jan 29, 2009

radweld made my cereal packet water pump gasket seal. Dropped it ingot the engine hot, it never lost water again!

Until i hydraulic locked it off road... Doh... That was a good few thousand miles after though.

fookin rad advice please

wiltshire landyman

I’m back

Trewey

Cockernee, Pasty munchin bastid.

wiltshire landyman

I’m back

Griffdowg

New Member

G-man

BBQ king

mysteryman

New Member

sypher

Well-Known Member

boydy1989

Well-Known Member

gblow

New Member

oil dripper

Well-Known Member

sypher

Well-Known Member

oil dripper

Well-Known Member

woods767

Well-Known Member

boydy1989

Well-Known Member

Similar threads