flashing milage

hi guys & gals
Scanner TF930 for Land Rover. will I be able to stop the milage from flashing with one of these
or will it have to be a nanocom if nanocom is there any body in Oxfordshire that could help me please beer tokens given

I can't say whether or not the iCarSoft TF930 will be of any use to you.
The problem, and you're not the only one who's been mistaken about this particular scanner device is that neither the Disco 1 nor Disco 2 are OBD11 compliant, while the scanner is and will work with LR Discoverys after mid 2004, that is the Disco 3 and later.
All you can do is "suck it and see", but I don't hold out much hope so be prepared to have to find a Nanocom, Hawkeye, Lynx or Testbook.

thanks for the heads up I'm glad I haven't wasted my money on one
murf

I came across a similar issue with a Jaguar it was the alternator cooking the battery, check the voltage output.

Yes low battery voltage will cause this problem.
AFAIK Nanocom etc wont reset it.
I had to get it plugged into a Testbook to reset the odometer
Rogers in Bedford did it, cost about £45
Mark

From the Nanocom website



Here's the full story

http://nanocom-diagnostics.com/product/ncom02-discovery-ii-td5-kit

Click on any of the blue headers for a full description

That worth knowing, I was thinking of buying a Nanocom but was concerned it may have limited uses.
Mark

I've had both Hawkeye and Nanocom.
Wouldn't waste my money on anything else.

thanks chaps looks like Nanocom it is then

biggeeeee said:

From the Nanocom website

View attachment 102189

Here's the full story

http://nanocom-diagnostics.com/product/ncom02-discovery-ii-td5-kit

Click on any of the blue headers for a full description

Click to expand...

from those "features" in 'UTILITY' only the RF test is important, the other functions can only increase the stored mileage so quite useless, for this particular issue the menu is "Settings - TRANSM-LOCK-WARN - Odometer Error warning"

· Odometer Error warning: The BCU can be programmed to show an error if there is a
difference between the odometer values stored in the BCU and the Instrument pack.
Available options are:
× The odometer will not flash if there is an odometer error (DISABLED).
× The odometer will flash if there is an odometer error (ENABLED).

Hi MrMurf,

I am in north Oxfordshire, I have a nanocom .

Cheers

sierrafery said:

from those "features" in 'UTILITY' only the RF test is important, the other functions can only increase the stored mileage so quite useless, for this particular issue the menu is "Settings - TRANSM-LOCK-WARN - Odometer Error warning"

· Odometer Error warning: The BCU can be programmed to show an error if there is a
difference between the odometer values stored in the BCU and the Instrument pack.
Available options are:
× The odometer will not flash if there is an odometer error (DISABLED).
× The odometer will flash if there is an odometer error (ENABLED).

Click to expand...

thank you murf

a big thank you to neilly stopped the mileage from flashing plus some other bits
all done with a nanocom top man many thanks murf