fitting stereo help

thequeenscheese · Jan 24, 2014

matt1295 said:
i dnt think you need to connect it at all

only if the camera is wired in to work like a amp

does it basically make the reverse cam auto on when in reverse rather than searching through the source button?

matt1295 · Jan 24, 2014

i think so yeah i dnt see how else it would work but if not needed rap the end up and tape it out the way is what i would do...

do you have the rest wired in and working yet

thequeenscheese · Jan 24, 2014

http://www.ebay.co.uk/itm/170-Wide-...d=100023&prg=1108&rk=3&rkt=4&sd=121255354363&
this was the cam i got

thequeenscheese · Jan 24, 2014

matt1295 said:
i think so yeah i dnt see how else it would work but if not needed rap the end up and tape it out the way is what i would do...

do you have the rest wired in and working yet

pretty much except need soldering n heat shrinkin properly, and the brake cam im sure ive seen the brake cam connected to the acc or ground suggested on a diff radio listing on ebay

matt1295 · Jan 24, 2014

you need to put your camera in to the camera rca on the head unit then wire the back wire to the reverse that way its knows when your reversing

this is what i would do otherwise how would the unit no when your reversing

thequeenscheese · Jan 24, 2014

Double DIN 7"e in Dash Car DVD Player GPS SAT NAV Bluetooth Touch Screen iPod | eBay

says on this one, where should it connect to then if i dont do this,i know hand brake is there a switch on the hand break some where?

matt1295 · Jan 24, 2014

inboxed ya

thequeenscheese · Jan 25, 2014

this where im upto:

[/URL][/IMG]

fitting stereo help

thequeenscheese

Well-Known Member

matt1295

New Member

thequeenscheese

Well-Known Member

thequeenscheese

Well-Known Member

matt1295

New Member

thequeenscheese

Well-Known Member

matt1295

New Member

thequeenscheese

Well-Known Member

Similar threads