P38A Fitting auxiliary power socket in the boot.
- Thread starter Grrrrrr
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
Why the ripcord with the petrol pump symbol?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Emergency flap access, keep all replies clean.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
Emergency flap access, keep all replies clean.
Owner mmodification?
My filler cap is the other side!
- Posts
- 58,170
- Location
- Preston Lancs.
Emergency flap access, keep all replies clean.
Much the same a loose nicker elastic then.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Think the picture is of the off side with the tailgate in the right of the pic.So your filler is on the n/s ?
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
I knew I could count on you Tony, good morning, I'll keep standing them up,you keep knocking them down.Much the same a loose nicker elastic then.
- Posts
- 58,170
- Location
- Preston Lancs.
I knew I could count on you Tony, good morning, I'll keep standing them up,you keep knocking them down.
Morning Alan and a fine morning it is. I must say that wakening up again was a complete pleasure and surprise.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
Whopps. You're right. Assumed he'd put it on the LHS where the caravan electrics flow. My filler cap is indeed o/s. Power outlet nearside. Couldn't put it below the flap because that part was stoved in when I got the car, a niggle I keep looking at and wondering whether to do anything about.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
QuoTE="wammers, 3764489, member: 23201"]Morning Alan and a fine morning it is. I must say that wakening up again was a complete pleasure and surprise. [/QUOTE]
That's how I felt yesterday after a rather heavy night on the beers.
[/QUOTE]That's how I felt yesterday after a rather heavy night on the beers.
- Posts
- 58,170
- Location
- Preston Lancs.
That is the factory fitted auxiliary socket MY 2000 and on. Earlier one was fitted to N/S into radio amp cover.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Every day is a bonus.Morning Alan and a fine morning it is. I must say that wakening up again was a complete pleasure and surprise.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
Interesting.
And the ripcord? Looks like a good idea should the solenoid ever fail. Maybe something for the tailgate would be a good idea too.
- Posts
- 58,170
- Location
- Preston Lancs.
Official Land rover tool is still available on eBay. http://www.ebay.co.uk/itm/Tala-6954...176894?hash=item4d278f2efe:g:HvkAAOSwGWNUYfU2
- Posts
- 58,170
- Location
- Preston Lancs.
Mine doesn't or it's come adrift, will have to fit one you never know when latch will go tits up.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
Already have the official tool.
Grrrrrr
Technician, Bodgit & Scarper Ltd
- Posts
- 19,850
- Location
- Buckinghamshire, UK. ('95 DT)
martyuk
Well-Known Member
- Posts
- 824
- Location
- Swindon, UK
They added the rip cord for the filler flap mid way through P38 production. My '95 didn't have one and I can't remember about the '98 - but my '01 does
- Posts
- 58,170
- Location
- Preston Lancs.
Part number for it is FUW100000 but as it's no longer available, any old piece of cord will do it i suppose.
