Fitting a snorkel

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discojol

discojol

New Member
Posts
42
Location
South Wales
Will be fitting my snorkel tomorrow. For those who have fitted them how hard are they to fit and how long do they take roughly? Also if anyone has any tips to make fitting it easier please let me know.

Jol
 
Be careful with the hole templates ... the five (maybe 6) bolt/screw holes don't always line up. Check it, measure it then get someone else to check and measure it before you re-check and measure and before drilling/cutting .. ;)

Be careful cutting the airbox to fit the Safari square inlet, take too much away and it won't seal well at all.
 
i fitted mine a few week ago on 300 and the one on vitara a few month ago and it looks a bit hard when you look at first but it really is simple, just check and recheck before cutting and drilling.
 
So .......

How did it go ??????

:nopics::nopics::nopics:
 
All went good cheers for the advice, The only problem i had was the air flow meter is which all the other disco 300's i no of haven't got one. But i managed to work my way around that. Didn't get any pics of the installation as i had to do it up my mothers as she was expecting a delivery. But i took some as soon as i got home.

DSC00479.jpg

DSC00481.jpg

DSC00482.jpg


Jol
 
You must log in or register to reply here.

Similar threads

J
Wide arches discovery 2
Replies
0
Views
188
Jordyv
J
G
Conversion of an oil bath air filter to run a snorkel
Replies
6
Views
213
grewth
G
julianf
Heated seat kits for 300tdi era defender seats...
Replies
7
Views
537
dag019
dag019
D
Fitting a snorkel
Replies
19
Views
2K
drfoster
D
L
Black & Decker BD 195/6 compressor
Replies
0
Views
618
lrmonks
L
Back
Top