Few Problems and questions

1st question,

I have just bought 4 angel eye spot lights, iv tool the feed for the angel eye from the side lights seem to work fine, the main spot lights anyone know how i can add a switch to this in the cab or even wire it into the stalk. I dont want to break anything.

2nd question

WINDOWS Argg.. my drivers window comes down about 6 inches and clunks and stops any idea's

the passenger window makes a noise but doesnt move and the rear window doesnt make a noise or move lol... any idea's?

How / when do you want the spots to come on?
a) Independently of other lights,
b) with only your sidelights or
c) with dip beam or
d) when you've got full beam on?

Do you want then to turn off when you turn the ignition off?

its a disco not a beemer

dogsbody said:

How / when do you want the spots to come on?
a) Independently of other lights,
b) with only your sidelights or
c) with dip beam or
d) when you've got full beam on?

Do you want then to turn off when you turn the ignition off?

Click to expand...

I want the rims to come on with the side lights and the spots to work either off main beam or a switch.

Iv linked them up today and i have it working lol... im so **** at it though, so i have

angel eyes wired into side lights, and the spots on my full beam all works.

you might want to look into fitting a relay or two for the main spotlights as they could overload and burn out the relay for fullbeam

I dont really use spots to be honest lol... its just for show

Still best to have them wired up right, plus you'll have to detatch them for MOT if they're too powerful like mine


I'm running mine on a separate switch and off of main beam onto a relay so come MOT time I just unclip the wire no questions asked