facelift head ..decided to make some head light grills

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

adaptorman

New Member
Posts
143
Only had the motor on the road and some bas....d at 4.30 am tryed nicking them . Lucky dogs had a lump of his leg ..anyway .going get some steel bar and wrap it around headlights anyone any ideas as i dont wont the bar to get in way of the headlight beam patterns if possible ..as ive got a day free to knock somert up...
 
Bastards.....if you do a search in the stolen part of the main page you will find this is not uncommon. I have heard you can use some sort of steel straps. These headlights normaly end up on eBay so you'd be better off etching your number plate on the front of the lamps. This puts (SOME) people off buying them & hopefully stealing them. Good luck
 
or if you can afford put the pattern light guards, after you tighten the screws fill the holes above them with black epoxy then when necessary you can remove them quite easy by undoing the nuts of the holders under the bonnet. Google out STC53193, £44.69 the cheapest at Pa**ock
 
Last edited:
diy style 10 modified and fitted
2rgeyv6.jpg
 
Landybandy said:
Bastards.....if you do a search in the stolen part of the main page you will find this is not uncommon. I have heard you can use some sort of steel straps. These headlights normaly end up on eBay so you'd be better off etching your number plate on the front of the lamps. This puts (SOME) people off buying them & hopefully stealing them. Good luck
Click to expand...
mice dotted and invisible details added too , if it helps them nicking them ,,oughts worth a try
 
few pms asking heres a pic , just made sure it wasn't affecting light patterns , not the best look , but stops them from been nicked (nothing worse then not sleeping)
2iha4wn.jpg
 
Cheers guys just a diy idea to stop thivies just ripping them out. Was going to powercoat them tbh ..but 2 silver lines.wouldnt right
 
You must log in or register to reply here.

Similar threads

Hugu
Freelander 1 How to do the facelift job
Replies
2
Views
1K
Hugu
Hugu
19_Hue_95
Cynthia - 300tdi Project
Replies
8
Views
2K
19_Hue_95
19_Hue_95
7
Help...electrical problems
Replies
13
Views
1K
sierrafery
sierrafery
2.0_hippo
L322 Range Rover 2002 L322 HSE with a full 2012 Facelift
Replies
5
Views
3K
chawks
C
Saint.V8
  • Sticky
200TDi Timing Belt Change and Cylinder head Refurb How To....
Replies
5
Views
13K
IamRobbie
IamRobbie
Back
Top