Engine Lift Points

Hi all,

my engine has got no lifting brackets at the rear, and i can't work out where one would fit. I bought a set on ebay, but i can't line up suitable bolt holes.
this is what i bought, but doesn't seem to fit

(longer bracket)

can anyone share some photos of theirs so i can work this out?
mines a 1975 diesel 2.25
prefix 906
Suffix C

thanks

This ad's photo's show different brackets too what you have.
http://www.ebay.co.uk/itm/Landrover...826?pt=LH_DefaultDomain_3&hash=item3cf84d5aba

Blackburn said:

This ad's photo's show different brackets too what you have.
Landrover series, 2.25 Diesel engine | eBay

Click to expand...

cheers, that looks like the problem.
anyone got a spare lying around?

Always used a rope or strop under the flywheel housing as the lifting points were rarely there.

Me two a nylon strap under the engine...dont trust lifting brackets.

KillaJoules said:

Always used a rope or strop under the flywheel housing as the lifting points were rarely there.

Click to expand...

good thought, but i was planning to do the crank seal. as far as i can tell, you need to lift the engine while removing the flywheel housing.

the part number i found for this engine was ETC5816
but it seems to be discontinued.

i've just ordered ETC7135

so when that comes i'll find out if its the right part