Engine coming out Advice

sandyt · Aug 20, 2012

Evening all does anyone know what height of lifter I need to get to lift the engine out it will be coming out complete and a recon going in complete any advice warmly received oh its a 4.6 petrol not an oil burner or mobile chip shop

Datatek · Aug 20, 2012

I shall be using my excavator to haul out the M51 engine complete with auto box and transfer box so height is not a problem

sandyt · Aug 20, 2012

You have been in France too long how is the weather over there?

Datatek · Aug 20, 2012

sandyt said:
You have been in France too long how is the weather over there?

It'd been pretty poor, but the last week has been between 30C and 40C, real extremes of temperature

Not as bad as the UK though with all your floods.

sandyt · Aug 20, 2012

I was in Abu Dhabi for the winter came back and it was freezing No floods here I am near heathrow so had 30 lastr few days and pretty good last few weeks so you can see I cooked another engine it was the heater matrix weeping allowed the system to pressurise and blew the top hose off going to get a recon from Joe at Emmotts

Datatek · Aug 20, 2012

Very cold here again last winter, snow hung around for ages, we never used to get snow but it seems to be a yearly event now.

sandyt · Aug 20, 2012

Thats when the Rangie comes in handy

Datatek · Aug 20, 2012

sandyt said:
Thats when the Rangie comes in handy

It's essential to get out of the valley, not a big hill but enough to stop most cars without chains, no chance in the Transit

Neighbour goes to the village in his tractor

Engine coming out Advice

sandyt

Well-Known Member

Datatek

Well-Known Member

sandyt

Well-Known Member

Datatek

Well-Known Member

sandyt

Well-Known Member

Datatek

Well-Known Member

sandyt

Well-Known Member

Datatek

Well-Known Member

Similar threads