Engine coming out Advice

[sandyt]

Evening all does anyone know what height of lifter I need to get to lift the engine out it will be coming out complete and a recon going in complete any advice warmly received oh its a 4.6 petrol not an oil burner or mobile chip shop

 

[Datatek]

I shall be using my excavator to haul out the M51 engine complete with auto box and transfer box so height is not a problem

 

[sandyt]

You have been in France too long how is the weather over there?

 

[Datatek]

You have been in France too long how is the weather over there?

It'd been pretty poor, but the last week has been between 30C and 40C, real extremes of temperature Not as bad as the UK though with all your floods.

 

[sandyt]

I was in Abu Dhabi for the winter came back and it was freezing No floods here I am near heathrow so had 30 lastr few days and pretty good last few weeks so you can see I cooked another engine it was the heater matrix weeping allowed the system to pressurise and blew the top hose off going to get a recon from Joe at Emmotts

 

[Datatek]

Very cold here again last winter, snow hung around for ages, we never used to get snow but it seems to be a yearly event now.

 

[sandyt]

Thats when the Rangie comes in handy

 

[Datatek]

Thats when the Rangie comes in handy

It's essential to get out of the valley, not a big hill but enough to stop most cars without chains, no chance in the Transit Neighbour goes to the village in his tractor