engine advice needed

hi , can anybody tell me if this engine is suitable as a relacement for my 1984 RR with an early 5 speed box,power steering and electronic ignition.would it fit straight in or would any mods be required?

"will fit early range rover,landrover series 3 stage 1 109 v8 or 101 forward control. compression ratio 8.25.1 3.5 v8 stripped engine part number RTC2382E "

hopefully the pics have attached ok cheers matt

This will help you find the year the engine was built and thus search what you need...
42500001A P6 3500 Auto 10.5:1 CR 1967-76
45100001A P6 3500 Auto 10.5:1 CR 1967-76
45500001a P6 3500 Auto 10.5:1 CR 1967-76
42700001A P6 3500 Auto 8.5:1 CR 1967-76
43500001A P6 3500 Auto 8.5:1 CR 1967-76
43000001A P6 3500S Auto 10.5:1 CR 1967-76
43200001A P6 3500S Auto 8.5:1 CR 1967-76
46600001A P6 3500S Auto USA 1967-76
48100001A P6 3500S manual 10.5:1 CR 1967-76
48500001A P6 3500S manual 10.5:1 CR 1967-76
10A00001A SD1 manual 9.35:1 CR 1976-87
11A00001A SD1 Auto 9.35:1 CR 1979-80
12A00001A SD1 man. 8.13:1 CR USA efi 1979-80
13A00001A SD1 Auto. 8.13:1 CR USA efi 1979-80
14A00001A SD1 Auto 8.13:1 CR Sweden 1976-87
15A00001A SD1 Auto 8.13:1CR Australia 1976-87
16A00001A SD1 Auto 8.13:1CR Japan 1976-87
17A00001A SD1 V8S man 9.35:1 CR 1979-80 (VDP 1981 on)
18A00001A SD1 V8S Auto 9.35:1 CR 1979-80 (VDP 1981 on)
19A00001A SD1 Man 8.13:1 cr Australia 1976 onwards
20A00001A SD1 Australia 8.13:1 cr efi 1982 onwards
21A00001A SD1 Australia 8.13:1 cr efi 1982 -87
23A00001A SD1 Man 8.13:1 cr SE/VDP 1982 -7
24A00001A SD1 Man AC 8.13:1crSE/VD 1982 -87
25A00001A SD1Man 8.13:1 cr SE/VDP 1982 -87
26A00001A SD1Auto 8.13:1 cr SE/VDP 1982 -87
27A00001A SD1 Man AC 8.13:1cr SE 1982 –87 hot climate
28A00001A SD1 Auto AC 8.13:1cr SE 1982 –87 hot climate
30A00001A SD1 Vitesse Man 9.75:1cr 1982-87
31A00001A SD1 efi Auto 9.75:1cr 1982-87
32A00001A SD1Vitesse Man AC 9.75:1cr 1982-87
33A00001A SD1 Auto AC 9.75:1cr 1982 –87
34A00001A SD1 Switzerland 9.35:1 cr 1982-87
36A00001A SD1 Switzerland 9.35:1 cr 1982-87
38A00001A SD1 Factory recon 9.35:1 cr 1982-87
39A00001A SD1 Factory recon 9.35:1 cr 1982-87


Range Rover 3.5 Litre

35500001C,D,E R.R Carb 8.25:1 cr 1970-83
35500001F R.R Carb 8.13:1 cr 1970-83
34100001 R.R Carb 8.25:1 cr 1970-83
35900001A R.R Carb CDK 8.25:1 cr 1970-83
39800001A R.R Carb 8 Australia.13:1 cr 1970-83
11D00001A R.R Carb pulsair 9.35:1cr 1970-83
13D00001A/B R.R Carb Auto 8.13:1 cr 1981-85
15D00001A/B R.R CarbpulsairAuto 9.35:1cr 1981-85
16D00001A/B R.R CarbpulsairAuto 9.35:1cr 1983-85
17D00001A/B R.R CarbpulsairMan 9.35:1cr 1983-85
18D00001A/B R.R Carb Man 8.13:1 cr 1983-85
19D0000!A/B R.R CarbpulsairMan 9.35:1cr 1983-85
20D00001B R.R CarbpulsairMan 8.13:1cr 1983-85
21D00001B R.R Carbpulsairauto 8.13:1cr 1983-85
22D00001 R.R Disc efi Man 8.13:1cr 1986 onwards
23D00001 R.R Disc efi Auto 8.13:1cr 1986 onwards
24D00001 R.R Disc efi Man 9.35:1cr 1986 onwards
25D00001A R.R efi Auto 9.35:1 cr 1986 onwards
26D00001A R.R Carb Man 9.35:1Cr 1986 Onwards
27D00001A R.R efi Auto 8.13:1Cr 1986 Onwards
28D00001 R:R Carb Man 8.13:1 cr 1986 onwards
29D00001A R:R Carb Auto 8.13:1 cr 1986 onwards
30D00001 R:R Carb Man 8.13:1 cr 1986 onwards
31D00001 R.R efi 8.13:1 cr 1986 onwards


Range Rover 3.9 LitreEngines

35D00001 R.R Disc efi Man 9.35:1cr 1988 onwards
36D00001 R.R Disc efi Auto 9.35:1cr 1988 onwards
37D00001 R.R Disc efi Man 8.13:1cr 1988 onwards
38D00001 R.R Disc efi Auto 8.13:1cr 1988 onwards


Range Rover 4.2 Litre Engines

40D00001 R.R 4.2 efi 8.94:1cr 1992 onwards


Range Rover 4.0 Litre Engines

42D R.R efi 9.34:1 efi 1994 onwards


Range Rover 4.6 Litre Engines

46D New R.R 4.6 efi 9.34:1 cr 1994 onwards
48D New R.R 4.6 efi 8.12.1 cr 1994 onwards

I think its ann early RR engine going by compression

cheers for the info mines 17D00001A/B R.R CarbpulsairMan 9.35:1cr 1983-85 and the one im looking at is 34100001 R.R Carb 8.25:1 cr 1970-83 so would it be a straight swap? could i use all of my original carbs starter etc etc?

think carbs will be ok ,not sure about alternator.
Manifolds may be ok.
It may be slower too.
Could be good if its cheap.I think the bottom end is weaker to your more modern engine but should fit just ok prehaps with a alternator issue

the engine is pulsair -germany,norway,sweeden-lt95 manual box.
and you have lt 77 manual box

cheers but what does that mean!

try for a lt 95 box its way better

bit late for that mate, the engines shot! so im looking to find out what year engine is compatable with the lt77 box and majority of my ancilleries?

have you considered a 3.9l?
Mines ace

Its probably easier to find an engine and then ask for what box it came on.