Electricals, for the winch/expedition/dual battery boys

Genuine Autometer Voltmeter x2

One as new, complete with box and new lighting kit.

One with slightly out of shape bezel but hard to notice, full guaranteed working order, complete with new lighting kit.

Ideal for dual battery setup.

Don't fit **** gauges lads.



£80/pair.


100A alternator, good used condition, bearings good.

Available with/without serp pulley, up to you!

Background goodies not included!



£40

All collect or post etc.

Thanks

ouch i would have had a gauge, but you can get new tims delivered for less than 20

if the alt will fit my pressbrake 2nd bracket i'll take it

trax said:

ouch i would have had a gauge, but you can get new tims delivered for less than 20

Click to expand...

Yeah and plenty of others, autometers are between 40 and 80 each in the uk depending on model!

I'm a sucker for them that's all, had £400/worth of gauges in my Honda, have you seen the price of Defi though, makes these look like pocket change!

SteNova said:

if the alt will fit my pressbrake 2nd bracket i'll take it

Click to expand...

It should do mate it's a land rover serp type unit, urm, get some measurements and I could take a look?

i'll put a measure on it tonight and post the pics

collect thurs night?

SteNova said:

i'll put a measure on it tonight and post the pics

collect thurs night?

Click to expand...

Yep, no trouble.

Can have a go at fitting it here etc if you want/are coming in the 90

Cheers

If ste doesn't have the alternator I'd be interested if it'll fit my 200?

you can pretty much make any alternator fit any bracket, generally speaking the brackets are wider than the alternator tabs, just depends what orientation of mounting and what spacers etc are used

anyway, its regular serp type so im sure it'll fit or be made to fit ste's bracket

cheers

Just home and getting pics

80mm between the non threaded fixings?
Untitled by Ste_Nova, on Flickr

Will check tomorrow

Bad times Ste



Serp unit is 70mm

However, checked my old V Belt unit, the one with the fan on the outside, and that's 80mm



Perhaps you need that type?

Limits your choice hugely, as far as i know the old type are only low output units.

Machine the bracket down?

Cheers!

isnt that the threaded hole your measuring?
I'm guessing it should look like this?

Non of the holes are threaded on this alternator pal

It has 4 tabs, evenly spaced both sides

My old 3 tab alt has 80 non threaded and then 1 single threaded tab up top

This must be a late type alternator

Fits mine no problem but my bracket mounts outside of the alt tabs not in between them

Yup

Groomers said:

If ste doesn't have the alternator I'd be interested if it'll fit my 200?

Click to expand...

Care to measure that there 200 engine of yours kind sir?

I will do, won't get chance till tomorrow night at the earliest, I have a spare (broken!) alternator so I'll measure that rather that getting oily.

Sorry haven't had chance to measure mine till today, mines 80mm too