Electric window fault

Opened up my right/rear door to investigate the non working window.

I'm thinking, snapped cable, faulty motor, seized mech.

Nope ....none of that....because none of that was there! It's all gone!

So, anyone got a door cable and motor set for 2004 , rear right door?

Cheaper buy a new one and fit that than faff on the off chance buying second that might just fail later on. Check the window still has a hole for the pincers or if the pincers are at the bottom of the window still. Otherwise you will need that also.

saxavordian said:

Cheaper buy a new one and fit that than faff on the off chance buying second that might just fail later on. Check the window still has a hole for the pincers or if the pincers are at the bottom of the window still. Otherwise you will need that also.

Click to expand...

Agreed. The complete mechanism isn't that expensive new. One of the advantages of Freelander 1 ownership

"Pincers"...?

The pincer or glass grip in the two photos I swapped over during replacement of the window regulator.

The bit you're pointing to appears to be still attached to the glass.
Or at least there is a sticky down lumpy bit that the block of wood is currently pushing up against!
I'm guessing that's what it is...

Yarp. That's good now you can remove that to add to the new window regulator.

Is it bolted on ? Like a 'pinch' clamp?

Flying Scotsman! said:

Is it bolted on ? Like a 'pinch' clamp?

Click to expand...

The glass has a clamped on section that bolts to the lift plate (pointed at).

Nodge68 said:

The glass has a clamped on section that bolts to the lift plate (pointed at).

Click to expand...

Yarp! That be correct. But be careful not to stress in removing or else