EKA Code
- Thread starter Arnirange
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
j the range
New Member
- Posts
- 3,927
- Location
- liverpool
hi eka code is 4 number code you puy into door lock you start by putting 4 to the rear then your 4 numbers hope this helps j
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
It's the Emergency Key Access code, should be on a smallish card with the handbook etc, at least mine is
Datatek
Well-Known Member
- Posts
- 45,015
- Location
- Near Poitiers SW France
Your handbook if you have one will tell you how to use the EKA code, if not do a search, there are several threads on here about entering the EKA code
gavbriggs
Well-Known Member
- Posts
- 5,861
- Location
- Sheffield uk
Security and Alarm System Operation & Diagnosis on Range Rover 4.0/4.6/P38A read that and it should be more clear, if you want to test your eka, take the battery earth lead off for 5 minutes and then put the lead back on!
note the 4 turns that you have to do BEFORE entering your 4 digit code. also not that you have to 'set' eact window in turn, including sunroof, this involves taking the window/roof through its full range. i.e on sunroof, back forward and tilt! windows, down and up. the message centre will display LR window not set (or set when you have completed the move) meaning you have/will need to set that window etc etc!!
hope this helps
note the 4 turns that you have to do BEFORE entering your 4 digit code. also not that you have to 'set' eact window in turn, including sunroof, this involves taking the window/roof through its full range. i.e on sunroof, back forward and tilt! windows, down and up. the message centre will display LR window not set (or set when you have completed the move) meaning you have/will need to set that window etc etc!!
hope this helps
Last edited:
Similar threads
