Hi Guys, I intend to renew my Defenders EGR Valve. Haynes manual is not very helpful, not covering the Valve on my vehicle.I have removed the two bolts holding the Valve to the cooler, but cannot find the location of two further 8mm bolts which are supposed to hold the metal pipe connecting to the inlet manifold. The Valve moves but is apparently held by another means. Any advice please?
EGR Valve replacement on Puma 2010 Defender110, advice please.
- Thread starter Debaggers
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 6,663
- Location
- uk
https://www.landyzone.co.uk/land-rover/how-long-to-change-egr-valve-on-2-2-defender.378779/
Link to a forum page dealing with the 2.2 puma egr valve. If the 2.4 engine type is different let me know and I'll get the pages for that engine.
Link to a forum page dealing with the 2.2 puma egr valve. If the 2.4 engine type is different let me know and I'll get the pages for that engine.
- Posts
- 6,663
- Location
- uk
Looks like the 2.4 has a different design - attached----
