I tried blanking the egr valve off with a plate made to fit. I blocked it off at the point the egr meets the body. Just a plate between.
Put it all back together tried starting and she wouldn't start. She just ticks over as if there was no fuel etc....
I took the plate out and she started, she sounded very rough so I revved her up and she settled.
What could have caused this?
I cleaned all the air flow pipes/ egr etc etc and I did spray with wd40... could that have caused the blockage and once I took the plate out it flushed it through.....
Thanks
Put it all back together tried starting and she wouldn't start. She just ticks over as if there was no fuel etc....
I took the plate out and she started, she sounded very rough so I revved her up and she settled.
What could have caused this?
I cleaned all the air flow pipes/ egr etc etc and I did spray with wd40... could that have caused the blockage and once I took the plate out it flushed it through.....
Thanks