eas software!!

wrxfifer · Jul 4, 2009

how long is it ment to run for? its been running bout 40 mins so far and nothing in the fault section??
tx and rx scrolling constantly!! with ff and other side 28 and 80s i think?
is this right?
i have had to bring power out now as battery in laptop bout dead?

nathan5346 · Jul 4, 2009

it runs as long as you want it to run if theres no faults that good, view the videos to understand how to use the software

wrxfifer · Jul 4, 2009

keep getting 28 and 80s on the right??
videos says its not working tried idle time up makes no odds???????????????????????

wrxfifer · Jul 4, 2009

it wont work been at this for 2 hours and had to put a new battery on it thats another £100 today had enough of this!!

nathan5346 · Jul 4, 2009

if you get them numbers then take the lead out and start again... cos it aint reading right... like i said theres plenty of 'how to' videos watch them... its a piece of cake

wrxfifer · Jul 4, 2009

i have the lead out turn off lock open turn key to second position plug in load software and other way about been doing thisd for an hour and same 28 80s wont change

wrxfifer · Jul 4, 2009

do i have to get in and set all windows first

j the range · Jul 4, 2009

i allways reset the windows befor i do anything

wrxfifer · Jul 4, 2009

tried everything it wont recieve?

wrxfifer · Jul 4, 2009

tried doing that just the same???

j the range · Jul 4, 2009

just thinking thats what funny noise is. is your bat fully charged? as you know low bat is not good news on p38?????

wrxfifer · Jul 4, 2009

im on the verge of a nervous breakdown

wrxfifer · Jul 4, 2009

its a new battery 1 hour ago from garage as other one was nearly dead dont see what else i can do

j the range · Jul 4, 2009

go have a rest from it have cup of tea come back to it. i am having nervous breakdown with you ask nat to come up and help he says its easy?????????????? lol

wrxfifer · Jul 4, 2009

i doubt this things just not ment to work wouldint be susprised if the whole thing needed rewiring and the connector isint working

wrxfifer · Jul 4, 2009

i have tried absolutely everything im starting to think my brand new battery is going as well now by the sound great!!!!!!!!!!!!!!!!!!!!!

wrxfifer · Jul 4, 2009

it just wont sync or recieve now i think the second battery is dead should i just keep buying batteries till i get it to work??
money is nearly run out

j the range · Jul 4, 2009

try starting it up. if nothing else you can put some thing back in bat. when you changed bat did you have to put eka coad in?

nathan5346 · Jul 4, 2009

wrxfifer said:
i have tried absolutely everything im starting to think my brand new battery is going as well now by the sound great!!!!!!!!!!!!!!!!!!!!!

where are you?

j the range · Jul 4, 2009

he not talking to you nat you said its easy lol i think he in fife

eas software!!

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

New Member

Active Member

Active Member

New Member

Active Member

Active Member

New Member

Active Member

Active Member

Active Member

New Member

Well-Known Member

New Member

Similar threads