Eas problem

Over the last couple of weeks my suspension keeps "locking"

Fortunately I have the relevant disc to reset - but it is becoming a pain!!

When I look at the listed "problems" on my laptop I always get the same error message

"PRESSURE SIGNAL CONSISTANTLY HIGH"

Anyone any idea what is causing this and how to fix it for good?

Bad connection, duff pressure switch are possibles. When it did that on mine I parted and re-made the connectors in the EAS box including the one under the valve block a few times with a squirt of contact cleaner (NOT WD40) and it's been fine since.

Datatek said:

Bad connection, duff pressure switch are possibles. When it did that on mine I parted and re-made the connectors in the EAS box including the one under the valve block a few times with a squirt of contact cleaner (NOT WD40) and it's been fine since.

Click to expand...

Good call Keith. Bad connection to the two yellow wires going into the plug from the pressure switch.