EAS Lead

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
It may do, but if it doesn't changing the pins isn't easy because the connectors are moulded around the soldered pins.

I just got myself a 9 pin d-type connector soldered wires to that as per the wiring diagram supplied with the software, and jammed bare wires into the OBD connector, it worked fine-ish, but then I didn't have time to get the proper cable.
 
Good Idea.
I gather the OBD end would be a socket and the pc a standard d connector.

If the plugs would do I can feel a connector block in the middle as a bodge coming on,

Cheers

Fred
 
Not silly at all,
I have been looking for weeks for this lead.
Did it take long to come?

Thank you for the link

Fred
 
not realy it took about 12 days. very good quality lead made by storey wilson who is the software program writer guru. all puchases help to fund his research to give us free software for our Range Rovers.
 
Having watched the videos on his website. It will allow you to clear fault codes ,set the various height parameters,check operation of the compressor by turning it on or off, the problem with the eas ecu is that once you have rectified any faults the system still will not work until the fault codes have been cleared, usualy a trip to your lr dealer who will help you to lighten your wallet by £100. this software allows you to diy.
so far I have not needed it but its there when I do. take time to look through storeys site its worth it.

Gary
 
i got an OBDII lead made up and posted to me for £25! and its bloody long as well.....
look out for malafax_dand! he makes them and he's the guy who wrote the reset and calibration software as well ( i think?) anyway he supplied me for the above price a little while back and you know it will defo work as well..........

edit, malafax_dand IS the same guy as the link in post 4.
i also neaded a serial bus convertor to connect R232 on the OBDII lead to USB for me lappy! £5 from ebay!
 
Hi Mad,

Should find diag as requested if I have done it properly

Hope this helps
Fred
 

Attachments

  • odb11.JPG
    odb11.JPG
    18.7 KB · Views: 147
You must log in or register to reply here.

Similar threads

scott02464
EAS on windows 7
Replies
11
Views
4K
scott02464
scott02464
jbyarna
P38 EAS and EASUnlock ... HELP !
Replies
16
Views
5K
tomcat59alan
T
M
New EAS Tools - EASunlock, EASfaults, EAScalibrate
Replies
2
Views
2K
lanmjdun
lanmjdun
Back
Top