EAS Compressor Noise

pwood999 · Jul 10, 2014

Following all my recent fixes, the EAS Pump was getting quite noisy, so did the usual replacement rubber mounts, but even though there was less movement on the pump, this didn't cure the problem. Searched the forums, and Googled, and eventually found the last two pictures on Pauls page here EAS Valve Block Rebuild Guide | PaulP38A.com

Raising the EAS box by 5mm sorted the noise out. That will teach me to read all the way to the bottom of HowTo pages !!

Pete

Grrrrrr · Jul 10, 2014

Interesting. Never had any issue there but having an oil burner it is noisy enough already!

Datatek · Jul 11, 2014

pwood999 said:
Following all my recent fixes, the EAS Pump was getting quite noisy, so did the usual replacement rubber mounts, but even though there was less movement on the pump, this didn't cure the problem. Searched the forums, and Googled, and eventually found the last two pictures on Pauls page here EAS Valve Block Rebuild Guide | PaulP38A.com

Raising the EAS box by 5mm sorted the noise out. That will teach me to read all the way to the bottom of HowTo pages !!

Pete

I reshaped the inner wing on mine to give clearance.:smash:

EAS Compressor Noise

pwood999

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Datatek

Well-Known Member

Similar threads