EAS Compressor Noise

[pwood999]

Following all my recent fixes, the EAS Pump was getting quite noisy, so did the usual replacement rubber mounts, but even though there was less movement on the pump, this didn't cure the problem. Searched the forums, and Googled, and eventually found the last two pictures on Pauls page here EAS Valve Block Rebuild Guide | PaulP38A.com

Raising the EAS box by 5mm sorted the noise out. That will teach me to read all the way to the bottom of HowTo pages !!

Pete

 

[Grrrrrr]

Interesting. Never had any issue there but having an oil burner it is noisy enough already!

 

[Datatek]

Following all my recent fixes, the EAS Pump was getting quite noisy, so did the usual replacement rubber mounts, but even though there was less movement on the pump, this didn't cure the problem. Searched the forums, and Googled, and eventually found the last two pictures on Pauls page here EAS Valve Block Rebuild Guide | PaulP38A.com

Raising the EAS box by 5mm sorted the noise out. That will teach me to read all the way to the bottom of HowTo pages !!

Pete

I reshaped the inner wing on mine to give clearance.:smash: