Disco 2 Driver's Side (RHD) Plastic A-Pillar

Okay, the driver's side black plastic A-pillar (gloss finish) is cracked all the way through at the top. I want to remove it and repair it with epoxy from the inside. (I notice a new one is around 200 AUD and they recommend you buy for both sides as the new ones are now a matt black plastic, unlike the old ones that were a gloss black plastic - that's 400 AUD!).

Now, if I remove and repair the driver's side A-pillar I have to punch-out the three plastic rivets that hold it in place on the inside of the door frame. Just wondering if I can repair and replace the A-pillar with new rivets?

Intestinalworm said:

Just wondering if I can repair and replace the A-pillar with new rivets?

Click to expand...

Off course you can, it's the same for both sides

Okay, I'll have to find new plastic rivets. Are they all the same throughout the vehicle - are these what they call scrivets? I'll need to buy at least three then before I take the A-pillar off.

They are usually sold in packs of 10, google out 79086L