drivers door

adamnbecky2010 · Aug 23, 2014

ok so ive tested drivers door for continuity from open to close and theres a beep checked from lock plug to outstation and theres power so why isnt the car recognising the unlock turns on the eka procedure im stumped now thought it was micro switches obviously not

totalgamesroom · Aug 23, 2014

how and where did you test the outstation? im having same issues with eka! waiting on diagnostics but im sure the eka does not work!

adamnbecky2010 · Aug 24, 2014

i traced the wire from the latch and tested it at different points using a multimeter set on continuity on mine its a green wire and a white wire then after the connector it changes to a blue wire with red stripe hope this helps

dogsbody · Aug 24, 2014

Have a look at the wiring/connectors where it passes from the door into the wing. Many reports of wiring breaking inside it's insulation or connectors corroding.

drivers door

adamnbecky2010

New Member

totalgamesroom

New Member

adamnbecky2010

New Member

dogsbody

Very senior member

Similar threads