I've done a search for this but didn't find anything...
The driver's door on my 1992 Defender 90 shuts without a problem but leaves a half inch gap at the top between the body and the door. The seal appears to be fine, but obviously the wind still gets in - it's especially bad on the dual carriageway at 60mph when the whole top half of the door shakes. I don't know if the problem is with the hinges or the actual door, but it's very frustrating in the cold weather.
Is there anything I can do to cure this without resorting to spending 300 quid that I don't have on a new door?
The driver's door on my 1992 Defender 90 shuts without a problem but leaves a half inch gap at the top between the body and the door. The seal appears to be fine, but obviously the wind still gets in - it's especially bad on the dual carriageway at 60mph when the whole top half of the door shakes. I don't know if the problem is with the hinges or the actual door, but it's very frustrating in the cold weather.
Is there anything I can do to cure this without resorting to spending 300 quid that I don't have on a new door?
