Freelander 1 Does anyone know what software can read landrover diagnostic codes

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

Darrenbunn6969

Member
Posts
81
Location
France
Hi I have a OBDII WiFi code reader I have the three lights coming on the dashboard but when I run torque or auto doctor it says no fault codes does anyone know what free software will work and read écu properly,
Also does anyone have a link for the rave disc I have searched the internet and can’t find any links. I have tried the links in the forums and don’t work Appreciate any help cheers
 
Last edited:
The engine ECU is fully OBD2 compliant so any OBD2 reader will get fault codes and many will give live data too. Something like an ELM327 Bluetooth OBD2 dongle and an Android phone or tablet running Torque will give you all live data and codes.

Otherwise if you want more than just engine information, then the Icarsoft I930 will read engine ECU, ABS ECU and SRS ECU. The I930 doesn't seem to connect to the TCM, alarm ECU or CCU which is annoying. For more complex coverage, you'll need to get a Hawkeye.

It depends on which lights are on as to which code reader will tell you what's up.
 
Nodge68 said:
The engine ECU is fully OBD2 compliant so any OBD2 reader will get fault codes and many will give live data too. Something like an ELM327 Bluetooth OBD2 dongle and an Android phone or tablet running Torque will give you all live data and codes.

Otherwise if you want more than just engine information, then the Icarsoft I930 will read engine ECU, ABS ECU and SRS ECU. The I930 doesn't seem to connect to the TCM, alarm ECU or CCU which is annoying. For more complex coverage, you'll need to get a Hawkeye.

It depends on which lights are on as to which code reader will tell you what's up.
Click to expand...
I have an elm 327 WiFi dongle is there no software I can use with that to read ABS fault codes ??? Et it’s great form engine faults and live datâ.
 
Darrenbunn6969 said:
I have an elm 327 WiFi dongle is there no software I can use with that to read ABS fault codes ??? Et it’s great form engine faults and live datâ.
Click to expand...
No. The ELM327 can only access OBD2 engine information on the CAN bus. The FL1 uses a K line bus for all other modules, which the ELM327 doesn't connect to. So to access ABS and SRS you need to get a dedicated LR reader.
 
Nodge68 said:
No. The ELM327 can only access OBD2 engine information on the CAN bus. The FL1 uses a K line bus for all other modules, which the ELM327 doesn't connect to. So to access ABS and SRS you need to get a dedicated LR reader.
Click to expand...
Thanks for the Info can anyone suggest an in expensive reader that will do the job
 
Last edited:
Darrenbunn6969 said:
Thanks for the Info can anyone suggest an in expensive reader that will do the job
Click to expand...

Your choice is limited to the Icarsoft I930 which is under £100 or the more expensive Icarsoft unit which name I've forgotten at the moment. Then there's the Hawkeye which is about £250. After that it's into professional garage equipment which costs much much more.
 
You must log in or register to reply here.

Similar threads

Freddie17
Diagnostic reader advice
Replies
19
Views
2K
Freddie17
Freddie17
K
Solid orange engine light
Replies
8
Views
583
kayte103
K
D
Indicator problem
Replies
9
Views
1K
dannyboy8
D
K
Solid orange engine management light
Replies
7
Views
490
kayte103
K
S
EPM what a nightmare..!!
Replies
16
Views
1K
nevillen
nevillen
Back
Top