Discovey not sitting level

B

bathgate

New Member

Posts

7

Location

West Sussex

• May 11, 2019

• #1

Hi my discovery 2 v8 is sitting down really low on the front off side( and high rear nearside) have checked the springs and even swapped them over it has new shocks fitted and is still on air with new ride height sensors and air bags could the ace system affect how the front sits there seems to be no resistance when you lift it up the spring just compresses any thoughts appreciated thanks Darren

 

andy85

Active Member

Posts

336

Location

Scarborough

• May 11, 2019

• #2

Ace doesn’t have anything to do with SLS

 

berg450

Well-Known Member

Posts

665

Location

Hungary

• May 12, 2019

• #3

I have the same problem. I had a 2" lift what i removed by using standard springs and shocks. The rear has air bags and height is calibrated, so sits equal. The front on the right side sits about 10mm down. I have not tried to change springs yet, but you said you tried but no difference.

 

neilly

Well-Known Member

Posts

20,000

Location

Oxfordshireness

• May 12, 2019

• #4

bathgate said:

air with new ride height sensors and air bags

Click to expand...

Was the height reset when the sensor was changed?

Cheers

 

B

bathgate

New Member

Posts

7

Location

West Sussex

• May 14, 2019

• #5

Hi neilly height was not reset after sensor change

 

B

bathgate

New Member

Posts

7

Location

West Sussex

• May 14, 2019

• #6

berg450 said:

I have the same problem. I had a 2" lift what i removed by using standard springs and shocks. The rear has air bags and height is calibrated, so sits equal. The front on the right side sits about 10mm down. I have not tried to change springs yet, but you said you tried but no difference.

Click to expand...

Yes swapped sides but no improvement

 

neilly

Well-Known Member

Posts

20,000

Location

Oxfordshireness

• May 14, 2019

• #7

bathgate said:

Hi neilly height was not reset after sensor change

Click to expand...

Could be a subtle difference in the new and old sensors reading slightly differently.

Cheers

 

B

bathgate

New Member

Posts

7

Location

West Sussex

• May 15, 2019

• #8

Thanks will get it reset fingers crossed

 

JUKE179r

Well-Known Member

Posts

3,166

Location

Suffolkshire

• May 15, 2019

• #9

Find someone with a Nanocom to reset it.

 

berg450

Well-Known Member

Posts

665

Location

Hungary

• May 24, 2019

• #10

bathgate said:

Thanks will get it reset fingers crossed

Click to expand...

Have you found the solution? I will change my springs and shocks next week, hope my car will be back in normal and equal height and also will drive better (will install stronger springs and bilstein shocks).