Discovery 300 Brake Problem

S

Splasher

New Member

Posts

154

• Dec 1, 2010

• #1

Hi everyone,
This is my first post so i hope i,ve got it in the right place.
I have a problem with a Discovery 300 (M Reg).
The handbrake is locked on and will not release.
Can i bang the drum with a hammer to release it or is it a complete strip down/repair.
PLEASE HELP

 

discool

Well-Known Member

Posts

13,620

Location

Sector 12 in Kent, The Garden of England

• Dec 1, 2010

• #2

Put a spanner on the adjusting bolt, I think it's 17mm, and slacken of the shoes then investergate why it stuck on, a sticking hand brake cable and also gubbings inside the drum maybe.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

Posts

83,296

Location

Embasinga stocæ

• Dec 1, 2010

• #3

or, of course, it could just be the weather. Leave the handbrake off and use 1st gear as a parking brake

 

DiscoPol

Well-Known Member

Posts

6,376

Location

The Land of Po

• Dec 1, 2010

• #4

mine froze on not long ago after a day messing about off road, next morning frozen solid.Outside temp was about -3 or 4

i just rocked it about in 1st low range for a while till it "freed" itself, been fine since, same year and model as yours.

I am not advising such measures just telling you what i did

 

S

Splasher

New Member

Posts

154

• Dec 1, 2010

• #5

Thanks for all your posts, and i,m now going to go brave -3 and a snow blizzard to try and get them free.

 

DiscoPol

Well-Known Member

Posts

6,376

Location

The Land of Po

• Dec 1, 2010

• #6

well come back and let us know the outcome.

 

S

Splasher

New Member

Posts

154

• Dec 1, 2010

• #7

DiscoPol said:

mine froze on not long ago after a day messing about off road, next morning frozen solid.Outside temp was about -3 or 4

i just rocked it about in 1st low range for a while till it "freed" itself, been fine since, same year and model as yours.

I am not advising such measures just telling you what i did

Click to expand...

Tried all of the above and still hand brake is locked solid...
Cant find the adjuster nut to slacken off the shoes so i think i,ll just burn it!!!!!!!

 

davek0974

Well-Known Member

Posts

4,848

Location

Bishops Stortford, Herts.

• Dec 1, 2010

• #8

Splasher said:

so i think i,ll just burn it!!!!!!!

Click to expand...

Seems to be a common direction on here

The adjuster is on the front side of the drum between the backplate and transfer box, i think its a 17mm bolt??

Undo a couple of click and whack the drum with a rubber mallet etc.

Mine sticks sometimes, just cracks when i pull away.

 

N

nicedayforit

New Member

Posts

588

Location

The village of the dead

• Dec 1, 2010

• #9

You could try a bit of heat on the brake drum just in case it is frozen

 

G

Gafferjim

New Member

Posts

226

Location

Northwest

• Dec 1, 2010

• #10

The adjuster nut is on the lower part of the backplate, sunken into a "well" and the size is either 17 or 19mm.
you will find it easier if you *feel* around the bottom of the backplate.

Either the shoes are frozen to the drum (most likely) or the cable has frozen, (you'd feel no resistance when pulling up the handbrake again after releasing it)