I posted a topic back in Jan regarding my disco's ride height. The Drivers side at the front sits about half an inch lower than the left. Last weekend I changed all four springs with new springs c/o britpart, and it has new shocks all round already, however it is still sitting low on the drivers side, the gap that I measure is between the top of the tyre and the wheel arch and there is still this half inch difference. The body to chassis bushes look fine, has anyone got any ideas?
disco 1 ride height
- Thread starter iainmcb
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Dont buy britpart spring is the best idea i have, ask oildripper about his.
are you measuring chassis gap?
thebiglad
Well-Known Member
- Posts
- 7,387
- Location
- Central France
I don't think he is - he's measuring between the top of the tyre and the wheel arch.
There's a thousand and one reasons why this may be happening but before going into that are you sure you want/need to be worried about half an inch??
iannotts
New Member
- Posts
- 4,401
- Location
- East midlands,
Need to measure chassis cap for an acurate measument 
I wouldn't worry about 1/2inch anyway
I wouldn't worry about 1/2inch anyway
