discool
Well-Known Member
- Posts
- 13,482
Ok, question two, Automatic with EDC ?
Disco 1 300 Tdi 1996 - Immobiliser Problem. Help!!
- Thread starter Mo786
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Yes automatic with EDC
discool
Well-Known Member
- Posts
- 13,482
Ok in that case u may have an iff sensor or its electrical connection, there are a few so u could start with the engine speed sensor, that will tell the engine control module ECM that the engine is turning over.
I believe for a full explanation of the EDC system u need the LR or Haynes workshop manuals.
You can download a copy of LR manual if u don’t have one.
Diesels are not my thing so don't ask me where the sensors are... I haven't s clue
I believe for a full explanation of the EDC system u need the LR or Haynes workshop manuals.
You can download a copy of LR manual if u don’t have one.
Diesels are not my thing so don't ask me where the sensors are... I haven't s clue
Thanks for your help, I've just bought a second hand amr immobiliser unit with fob so hopefully that will workOk in that case u may have an iff sensor or its electrical connection, there are a few so u could start with the engine speed sensor, that will tell the engine control module ECM that the engine is turning over.
I believe for a full explanation of the EDC system u need the LR or Haynes workshop manuals.
You can download a copy of LR manual if u don’t have one.
Diesels are not my thing so don't ask me where the sensors are... I haven't s clue
Kenbo
Active Member
- Posts
- 189
- Location
- Coleraine, Northern Ireland.
I'm watching this with interest, have the same problem but intermittent, usually starts OK but I can't rely on it.
Appreciate it if you post up result.
Appreciate it if you post up result.
Similar threads
