P38A Diff front

jamesmartin · May 29, 2017

p38 is different to defenders disco and previous rrc as diff are handed front and rear ,but both could go in either ,its just when one diff is used to do front and back the front one spends its time except when in reverse driving the back side of the teeth on crown wheel

Grrrrrr · May 29, 2017

jamesmartin said:
p38 is different to defenders disco and previous rrc as diff are handed front and rear ,but both could go in either ,its just when one diff is used to do front and back the front one spends its time except when in reverse driving the back side of the teeth on crown wheel

So if you swapped the crown wheels over they would last twice as long?

jamesmartin · May 29, 2017

Grrrrrr said:
So if you swapped the crown wheels over they would last twice as long?

you can swap crown wheel and the pinion easy enough i dont think twice as long a bit longer,but pinion or carrier bearings fail long before cw/p usually

Landyrote · Jun 8, 2017

Ok I just took the diff out and the case was full of rollers and I guess with the play in the flange it's the bearing is it a hard job do I need a puller etc and cost of a decent replacement thanks in advance any advice is welcome

P38A Diff front

jamesmartin

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

jamesmartin

Well-Known Member

Landyrote

Member

Similar threads