- Posts
- 58,170
- Location
- Preston Lancs.
Does it have aircon?
P38A Diesel Head gasket again
- Thread starter tarphenry
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Does it have aircon?
- Posts
- 12,149
- Location
- Sud ouest France !
Evening Tony, it does my good man
tarphenry
Well-Known Member
- Posts
- 1,522
- Location
- bury lancs
Well the buggers done it again !!!!!!! 60 miles down the road after a day of running about and short motorway dashes to test everything. off we go to chester 6o miles in "Red hot light on, no power. pulled over hoses hard and hot. recovered home. looking for another motor now.
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
A member on here was selling a DSE. Saw it in a thread. @rangerollerdT can you remember who?
What the whole or just the motor?
@Grrrrrr this 1? https://www.landyzone.co.uk/land-ro...-nanocom-final-price-drop-before-ebay.351431/
J
@Grrrrrr this 1? https://www.landyzone.co.uk/land-ro...-nanocom-final-price-drop-before-ebay.351431/
J
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
Yep, that's the one. BrenK.
tarphenry
Well-Known Member
- Posts
- 1,522
- Location
- bury lancs
Thanks chaps ,put feelers out for refurbed motor. may just buy something else
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
Check your PM's.
- Posts
- 58,170
- Location
- Preston Lancs.
99% a cracked head. Not a lot else it can be.
tarphenry
Well-Known Member
- Posts
- 1,522
- Location
- bury lancs
heads coming off this morning
tarphenry
Well-Known Member
- Posts
- 1,522
- Location
- bury lancs
Sorry for the delay in continuing my story, but 2 stays in horsepital slowed progress somewhat. Anyhoo, removed head to find that it had failed the same as the last one, but in different location. sent head for checking and pleased to find its crack free and flat. Block is good so cleaned everything off, checked it for flatness and all is good, fitted a Landrover head gasket and fiinished it this am.. I can see a court case pending so cannot mention the gasket supplier yet. I will keep everyone informed of progress or lack thereof.
- Posts
- 18,966
- Location
- Buckinghamshire, UK. ('95 DT)
I'm getting nowhere with Arnott and my patience is waning. It seems no-one gives a flying f*ck about quality anymore. The race to the bottom is complete and now they've started burying each other.
When some manufactures sell crap, they try to avoid the fact that they do, and like to be in denial about it
Henry_b
Think outside, no box required.
- Posts
- 15,354
- Location
- somewhere else
Soooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
Hows the old girl going now?
Hows the old girl going now?
tarphenry
Well-Known Member
- Posts
- 1,522
- Location
- bury lancs
Running fine, but there is still a niggling doubt that it might do it again. I have decided to carry on and get the old girl into good condition ,All the rest of the bits and pieces done. Airbags on their way just sorting out bulbs for dash switches before I remove dash and do blend motors ( well the one my side really) two tyres arrived yesterday. Then if the problem re occurs I will bite the bullet and get another engine put in. till then fingers crossed
- Posts
- 12,149
- Location
- Sud ouest France !
