stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
Hi All does anyone know the protocols a 1996 2.5 diesel rr M51 engine uses for the diagnostics?
P38A Diagnostic protocols
- Thread starter stemac33
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 58,170
- Location
- Preston Lancs.
You need dedicated diagnostics for these cars. NO OBDII scanner will work on them.
stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
will a obd lead connected to a laptop with the right software work
- Posts
- 58,170
- Location
- Preston Lancs.
There are or have been some dedicated diag that uses a laptop. Anything you can get off Ebay for £30.00 WILL NOT work other than for the EAS. Nanocom is best diag for these vehicles.
- Posts
- 18,961
- Location
- Buckinghamshire, UK. ('95 DT)
I believe there is some BMW software on the web that probably works but the plug is round so you'd have to work out the pins.
most people use Blackbox solutions like the Nanocom or there is Hawkeye and Lynx that read it too. Generally held not to be as good.
The Land Rover International Rescue map shows members with diag who are willing to read stuff for cake or beer tokens.
most people use Blackbox solutions like the Nanocom or there is Hawkeye and Lynx that read it too. Generally held not to be as good.
The Land Rover International Rescue map shows members with diag who are willing to read stuff for cake or beer tokens.
- Posts
- 18,961
- Location
- Buckinghamshire, UK. ('95 DT)
Maybe an Easter egg ...
- Posts
- 16,475
When I had Bimmers I used an OBDII to ADS (the BMW round plug) adaptor and run the INPA diagnostic gear for the Bimmers....
The protocols the Bosch EDC system uses are proprietary to Bosch and unless you have the resources of the like of Blackbox et al, decoding and etc will be time consuming and mostly out of the range of the home DIY'er.....even the Legend that is Storey Wilson who has done a huge amount on the diagnostic scene for the home user in his spare time decided the Diesel P38 wasn't worth the effort as there are much simplier and more cost effective diagnostic solutions out there.....
