Defender td5 water pump cover

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Evan farmer

Active Member
Posts
782
My td5 water pump cover is leaking bad with corrosion from what ive read the centefugile has to be removed to remove actual water pump do i need to remove the centefugile just to remove the water pump cover
 
My td5 water pump cover is leaking bad with corrosion from what ive read the centefugile has to be removed to remove actual water pump do i need to remove the centefugile just to remove the water pump cover
opening the bonnet can also be just a hard job on its own for some
depending where the leak is?
moving things out the way is part of the game my friend some people like to struggle while others dont

just wait untill you have to replace an oil cooler

ps the spinner is only held on with a 3 bolts to the block .... a couple of nuts on the sump ..not exactly a big job to remove nothing worth to brag about really
 
Last edited:
opening the bonnet can also be just a hard job on its own for some
depending where the leak is?
moving things out the way is part of the game my friend some people like to struggle while others dont

just wait untill you have to replace an oil cooler

ps the spinner is only held on with a 3 bolts to the block .... a couple of nuts on the sump ..not exactly a big job to remove nothing worth to brag about really
Will there be much of the oil going as its new oil two weeks ago
 
Will there be much of the oil going as its new oil two weeks ago
if you have over filled the oil then yes
if you are are on even ground or engine not not level for other reasons.... yes you will loose some oil ..... but there is no harm in catching it into a clean container either
 
Back
Top