pornstarmax
Active Member
- Posts
- 400
Anyone got any idea if a series and fender chasis width between (inside the rails) is the same or different?
Thanks
Max
Thanks
Max
Defender/Series chasis Width?
- Thread starter pornstarmax
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
i thought they wre the same i know a defender bulk head fits on,and i have fitted 5sp gear boxes with defender mounts
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
if ya google landrover chassis dimensions and select images you'll have no trouble finding the answer
dr pepper
New Member
- Posts
- 1,438
- Location
- lancashire
Jim, more info on the 'box swap, are you saying that the lt77 just bolts straight onto the series chassis?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
1 used the mounts off a defender that came with the gear box ,driiled 3 holes and used 100mm bolts straight through ,i also used seat box gear box tunnel floor plates and positioned gear box so stick was in right place but we were fitting a 200 tdi as well so i cant remeber if we had to move engine mounts we also modified t/bo diff so that it only ran 4wd when difflock applied ,also remover series cross member and bolted in def one
dr pepper
New Member
- Posts
- 1,438
- Location
- lancashire
Right get that now, the deffy mounts bolt directly onto the chassis rails, you didnt fasten up to the series box mounts, kinda makes sense the op was about if the rails were the same width or not.
If you used the same prop shaft then you'dve probably move the engine up 100mm as the deffy box is 100mm longer.
If you used the same prop shaft then you'dve probably move the engine up 100mm as the deffy box is 100mm longer.
