Defender 90 rear shock lower bush replacement

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
S

Sam Warder

Member
Posts
40
Hi all,
Having a bit of a problem with my 90, I need to replace the lower rear shock bushes on my defender but when I go to do it the shock keeps spinning and the nut is on so tight I will end up rounding the bottom holding tap. Anyone have any ideas how I can stop the shock from spinning then I can get a breaker bar or impact gun on the bottom.

Thanks, Sam
 
Big grips or a strap. The other option is carefully cut it off or cut the shock off and buy some new ones. Not expensive and probably knackered anyway.
 
I concur with Anaconda, give it a shot but don't spend any real time on it, cut it off and fit new. Britpart cheapest work fine.
 
I cut the nut off my old ones, they were badgered anyway but I did manage to do it with out touching the thread, those really thin cutting discs on the angle grinder work very well!
 
i had the same issue when i came to take my rears off, couldn't stop it revolving. the thread was buggered anyway so i ended up buying two new Terrafirma rear shocks and intend to swap them soon. have just bought this today to help get the old ones off and the new ones on!!

filter strap
 
Sam Warder said:
Hi guys, I used a filter strap round the shock and it worked!! Changed my lower bushes and now praying the old girl makes it through the MOT tomorrow
Click to expand...
glad the strap wrench worked but i use chain link mole grips as the shock will then definitely not spin.

1708647017496.png
 
You must log in or register to reply here.

Similar threads

D
Rear shock PITA!!!
2
Replies
22
Views
2K
Brown
Brown
adyw
Front suspension bush replacement
Replies
5
Views
808
KISSMYAURA
KISSMYAURA
dag019
Shocking rear shock issue
2
Replies
31
Views
4K
miktdish
miktdish
J
Cracking new shock absorber bushes
Replies
8
Views
891
dag019
dag019
Def90man
Series 1 shock bushes
Replies
10
Views
852
Def90man
Def90man
Back
Top