markthespark2804
New Member
- Posts
- 2
Hi
I need help the props I have bought do not fit
The one prop is a snug fit on the rear and when I fit on the front it has slightly more play ( about 20 mm ) and this one is marked rear
The other which is marked front pops the seal and shows the splines when fitted on front or rear but on rear only just
It has a discovery back axial
I did fit discovery prop to the rear as a temporary measure and this seems to be the same as the one marked front and same problem with the splines
man in shop says they are correct
distance between differentials and box is about 67 cm rear and 65 cm front
any help would be nice
many thanks
mark the spark
PS
I am also working on a discovery 300 with the clutch arm pushed through the ball and its no mean job on your own but I am trained but as an electrician .
I need help the props I have bought do not fit
The one prop is a snug fit on the rear and when I fit on the front it has slightly more play ( about 20 mm ) and this one is marked rear
The other which is marked front pops the seal and shows the splines when fitted on front or rear but on rear only just
It has a discovery back axial
I did fit discovery prop to the rear as a temporary measure and this seems to be the same as the one marked front and same problem with the splines
man in shop says they are correct
distance between differentials and box is about 67 cm rear and 65 cm front
any help would be nice
many thanks
mark the spark
PS
I am also working on a discovery 300 with the clutch arm pushed through the ball and its no mean job on your own but I am trained but as an electrician .