Defender 110 Hybrids - Electrics & Looms

Good afternoon all -

After 5 years of living with my Def 110 2.8 (and a few electrical gremlins) I have started investigating a complete re-wiring job, that is the full thing: Engine loom / lights , the lot.

I would like to do it properly though, drawing a plan on paper, constructing the wiring on a board, then install it properly, using the appropriate wiring products etc. - In fact i'd even want to work on this myself, as the vehicle often goes travelling and I also do want to know it inside out!

Does any of you know if there are specialists that do this (I am thinking of the folks that rebuild old classics, etc)? and what the costs may be (apart from " a lot!"?

Any help gratefully received as usual!

GG

Or
Custom made Automotive Wiring Looms - Rapidfit Wiring Looms

not used them, but would seem to be able to make up a look to your spec, so would be able to include extra wiring for lights etc in the main loom.

is there actually much call for this. my soon to be father is law used to make wiring looms in the aircraft industry and we were discussing something like this a while back.

custom made adaptable looms for landrovers - so if you want to add a fridge or something you just purchase an add on part for the loom

all with waterproof connectors are various points so you could strip out parts of the loom when you are stripping the landy.

we werent sure if it was worth pursuing?

not as easy as it first sounds.

Whys that then?

tis only a bit of magical pipe that stops the smoke escaping after all.

Coz yu need to know wot size the pipe is that yu are connecting it to, for starters.